Battery Heavy Impact Testing Machine New Energy Battery Building Tester
Introduction:
Battery weight impact testing machine After the battery is fully charged according to the test method of 4.5.1, install the battery on the surface of the platform, place a metal rod with a diameter of 1.58mm±0.2mm horizontally on the upper surface of the geometric center of the battery, and use a metal rod with a mass of 9.1kg±0.1kg The heavy object falls freely from a height of 610mm±25mm and hits the surface of the battery with the metal rod, and observe it for 6 hours.
Meet standard:
GB31241-2014
SJ/T 11169-1998(UL1642:1995)
GB/T 18287-2013
UN 38.3
QB/T 2502-2000
GB/T 8897.4-2008 (IEC 60086-4:2007)
GB/T 21966-2008 (IEC 62281:2004) (Safety requirements for primary batteries and batteries in transportation)
Equipment features:
Automatically lift the weight, and automatically stop when it is adjusted to the required height.
Press the test to automatically drop the hammer to complete the test.
The cabinet adopts double-layer anti-protection function.
Inner box smoke exhaust fan, high temperature explosion-proof lamp.
Specification:
| NO | Item | Parameter |
| 1 | Weight of falling ball | Parameter |
| 2 | lmpact height | 9.1Kg±0.1Kg |
| 3 | Height display | 0~1000mm |
| 4 | Height error | display through the controller, accurate to1mm |
| 5 | impact method | ±5mm |
| 6 | Visual window | release the falling ball after raising it to a certain height, and the falling ball will fall freelyin the vertical direction,without tilting or shaking |
| 7 | Upper and lower impact surface | 250mm*200mm |
| 8 | Box door | stainless steel plate |
| 9 | Outer box materia | single door double door, open temperedcold-rolled plate paint
treatment, thickness 1.5mm |
| 10 | Exhaust outlet | located on the back of the box, diameter 150mm, can be connected to
anexternal exhaust fanconvenient for externallaboratoryhigh-power exhaust fan |
| 11 | Inner box materia | #201 stainless steel, thickness 1.2mm, 1/3 with Teflon tape, high temperature resistance
anti-corrosion, insulation easy to clean |
| 12 | Horizontal diameter | 15.8+0.2mm (5/8 inch) steel rod (placed vertically in the middle of thebattery, heavyobjects fall
on the steel rod, and thesteel rod remains parallel to the bottom surface of the battery) |
Details:
Product Tags:
|
|
Electronic Battery Heavy Impact Testing Machine New Energy Battery Building Tester Images
|
