Battery Extrusion Needle Punch All-In-One Machine For Cell Lithium Battery
Introduction:
The battery extrusion needle punch machine is suitable for simulating thesituation of battery crushing and puncture when using, transporting, storingor disposing of household waste. Extrusion test, the extrusion direction should follow the following rules: a battery is squeezed only once, and thebattery is qualified without explosion and no fire.
Meet standard:
GB31241-2014 YD 1268-2003
UL1642
YDB032-2009
UN38.3 MT/T1051-2007
GB/T18287-2013
YD/T 2344.1-2011
Extrusion Parameters:
1.Drive mode: servo motor drive
2.Force range:1~20kN(adjustable)
3 Force measurement accuracy: 01%
4.Unit conversion: kg, N Ib
5 Extrusion stroke: 300mm
6.force value display: PLC touch screen display
7. Batterv extrusion head: standard extrusion head, area 220cm²
Specifications:
| NO | Item | Parameter |
| 1 | Test space | 300x300x300mm (length x width x height) |
| 2 | Force range | 1~20kN(adjustable) |
| 3 | Extrusion stroke | 300mm |
| 4 | Box material | inner box stainless steel, outer box cold-rolled steel plate spray treatment |
| 5 | Features | The rear side of the box is designed with exhaust vent and pressure reliefdevice,
and the box is equipped with lighting |
| 6 | Steel needle | 3mm 5mm high temperature resistant tungsten steel needle,ength of100mm (can be specified) |
| 7 | tinerary | 200mm |
| 8 | Clampable battery distance | 200mm |
| 9 | Unit conversion | Kg,N, LB |
| 10 | Needle punching speed | 10~40mm/s(adjustable) |
| 11 | Needle prick force value | 1~300Kg |
| 12 | Force value display | PLC touch screen display |
| 13 | Data acquisition | 1 channel each for voltage and battery temperatureservo |
| 14 | Drive mode | motor control stroke adjustable, speed adjustable box bodymaterial: iner box stainless steel, outer box cold-rolledsteel plate |
Details:
Product Tags:
|
|
Lithium Battery Extrusion Needle Punch All In One Machine 20kN Adjustable Images
|
